Skip to content
BPindex — The Largest Building Products Directory in the UK

Electric Heating Products

Mix and match with 3 versions of the Mendip Woodland Large stove – Made in Britain

Building Products Index Ltd Electric Heating Products, Wood Burning stoves Leave a Comment

View the Eurostove entry on BPindex

Visit the Eurostove website

Manufactured in Somerset, this British designed stove, with all the qualities needed for today’s modern living, is now available in a larger design, perfect for open-plan schemes and spacious living areas. The Woodland Large has something for everyone, with 3 different iterations, Electric, Gas and a traditional woodburning offer.

The Mendip Woodland Large DC 7kW woodburner

The new Woodland Large DC woodburner is a powerful 7kW stove with higher legs and a deep chamber for a spacious feel. Its large glass viewing window and clean-lined look make it ideal for both contemporary and classic interiors.The

The Woodland Gas fire

The Woodland Gas fire, inspired by the woodburning version, is perfect for smoke free locations, and features easy to use controls, and a realistic log effect. The programmable handset allows complete control over the stove.

The Woodland electric fire

And the Woodland Electric brings all the convenience of an electric fire into a statement piece for your living areas, or even bedroom. This 570mm wide 2kW stove is fully programmable, enabling users to set a specific heat requirement at a specific time, so no more coming home to a cold house after work or a trip away. The flames can be selected in multiple colours to create a different ambience at various times of the day.

So why not have one of each!

About Mendip Stoves

Mendip Stoves, manufacturer of modern woodburning and multifuel stoves, opened its brand-new factory in Somerset in January 2023. The Mendip range is also designed in Britain, ensuring that the stoves are beautifully built by experienced craftsmen using cutting-edge technology. Mendip stoves are manufactured to exceed British standards with demand for quality at every stage. From its heavy-duty steel body to the ergonomically designed door handle, every detail has been meticulously considered.

The Woodland Large woodburner costs from £2,287. The gas version is from £2,412 and the Electric from £980.

Adveco FUSION Simplifies Low-Carbon Water Heating

Building Products Index Ltd Electric Heating Products, Heating, Hot water systems Leave a Comment

View the Adveco entry on BPindex

Visit the Adveco website

  • Expanded range of electric water heaters (Fusion-E) and packaged renewable water heaters (FUSION-T)
  • Rugged and highly resilient for use in both hard and soft water conditions
  • Easier and faster to install

Commercial hot water specialist Adveco expands its award-winning low-carbon FUSION packaged electric water heater system. Offering 80 pre-sized variants and multiple prebuilt pipework options FUSION simplifies the process of specifying and installing sustainable hot water in commercial buildings.

FUSION-E is an electric water heater combining Adveco’s ARDENT electric boiler with a specially designed single (ATSI) corrosion-resistant stainless steel high-pressure indirect cylinder, pipework, thermostat and overheat thermostat. FUSION-T packages the electric boiler with a twin-coil (ATST) cylinder an FPi-32 monobloc air source heat pump (ASHP) and a FUSION Control Box for greater carbon reduction. FUSION-E and T-plus plus variants incorporate a 6 kW electric backup immersion and FUSION Control Box, plus provide remote alerts for added business resiliency.

The entire FUSION line now supports storage capacities ranging from 300 to 750-litre capacity with nominal power output starting at 14 kW in the FUSION-E and up to 33 kW in FUSION-T models that combine the electric boiler and an ASHP. FUSION will now support continuous flow rates of over 560 litres per hour, and in excess of 1380 litres during a two-hour period of peak usage.

Compared to equivalent gas-fired water heating systems the FUSION-E models, solely deploying the ARDENT electric boiler will provide carbon emission savings of more than 38%. But with smart controls balancing two heat sources in FUSION-T models contribution from the ASHP is maximised to deliver a working flow of 50-55°C at an ambient operating temperature of 2°C setting a realistic benchmark for operating conditions in the UK. This ensures the electric boiler is not required to work as hard to raise flow temperatures to the 65°C demanded by commercial applications. Carbon emissions compared to electric-only systems are cut by up to 29% and by as much as 56% compared to gas-fired equivalents.

Incorporating water heating as a part of a sustainable building strategy, whether new build or retrofit, is typically complex and therefore time time-consuming and expensive. FUSION was conceived to address these challenges, simplifying the specification and installation of water heating with defined carbon savings. With the electric boiler mounted directly onto the cylinder with pre-built pipework supporting left or right-sided boiler location, FUSION is a more compact, space-saving alternative to gas water heating that can be installed and operational in as little as four hours.

Bill Sinclair, technical director, Adveco says: “With greater choice and continued development, FUSION stands as the benchmark for all-electric water heating in commercial buildings that must address their carbon emissions today. The hybrid approach that FUSION-T variants provide is, without doubt, the most effective and efficient way of optimising current technology to address net zero strategies in a realistic, lower-impact and cost-effective manner.”

“FUSION has proven to be a tough all-rounder, no matter a project’s location,” Bill continues.  The corrosive effects of soft water are easily mitigated by FUSION’s stainless steel cylinders whilst the electric boiler, with multiple immersions inside its sealed storage tank, provides automatically balanced usage to prolong system life and immediate resilience for the boiler.  With this sealed ‘primary’ loop, the electric boiler heats the same water continuously effectively eliminating limescale issues typically found in electric systems used in hard water areas. “FUSION continues to run clear and free of scale after a year of operation whereas electric immersions at the same location can be reduced to scrap in a matter of weeks,” Bill observes.

For those wishing to futureproof a specification, the FUSION-E systems can also be supplied with a twin-coil ATST cylinder as an alternative to the ATSI. Prebuilt pipework provides connection for the electric boiler to the lower coil in this case. The addition of a heat pump later can therefore be supported with a new pipework kit and controls upgrading the system to a FUSION-T specification.

For commercial organisations with both small or larger sink-led hot water demands, taller buildings with basement plant rooms or operations that rely on 24/7 hot water supply Adveco FUSION provides the most comprehensive response available today.

Key features

FUSION-E

  • High-quality ATSI single coil stainless steel vessel with mounting points & brackets
  • Available with 200 – 750 litre capacities
  • Cylinder pressure 10 bar as standard
  • 9, 12 or 24 kW electric boiler
  • Pre-built pipework (left or right)
  • Thermostat and overheat thermostat
  • Compact space-saving form factor
  • 15 pre-sized variants from 9 to 24 kW

FUSION-Eplus

  • 6 kW electric immersion
  • FUSION Control Box & remote alerts
  • 15 pre-sized variants from 9 to 24 kW

FUSION-T

  • High-quality ATST twin coil stainless steel vessel with mounting points & brackets
  • Available with 300 – 750 litre capacities
  • Cylinder pressure 10 bar as standard
  • 9, 12 or 24 kW electric boiler
  • 6 or 12 kW air source heat pump
  • Pre-built pipework (left or right)
  • FUSION Control Box
  • Compact space-saving form factor
  • 25 pre-sized variants from 14 to 33 kW

FUSION-Tplus

  • 6 kW electric immersion
  • FUSION Control Box & remote alerts
  • 25 pre-sized variants from 15 to 34 kW

Visit: https://adveco.co/products/water-heating/fusion-packaged-electric-water-heaters/

Latest Electric Heating Updates from Consort Claudgen!

Building Products Index Ltd Electric Heating Products, Heating Leave a Comment

View the Consort Claudgen entry on BPindex

Visit the Consort Claudgen website

Consort Claudgen, a renowned brand in the heating industry, is making waves once again with their latest product launches. These new offerings combine cutting-edge technology, energy efficiency, and user-friendly features to provide the ultimate heating solutions.

1) Consort Claugen launches DF2E downflow fan heater

Consort Claudgen’s new DF2E downflow fan heater has a 7-day timer and six temperature settings per day, allowing you to personalise your comfort. Features include open window detection, a digital lock, a large LCD screen, a digital variable thermostat, and a reliable battery backup to keep the clock running during power outages. The heater continues its heating programme after power is restored.

The heater offers quick warmth and allows you to choose between 1kW or 2kW heat output during the installation. As it approaches the desired temperature, it automatically reduces the heat output to 1kW to save energy. For safety, the DF2E has an automatic safety cut-out and will stop operating if the fan or temperature sensor malfunctions. The DF2E heater combines modern heating technology, energy efficiency, and safety, making it an excellent choice for bathrooms and kitchens.

For more information about our downflow heaters, click here.

2) Consort Claudgen includes Wi-Fi enabled heaters in the LST range


Consort Claudgen now offers Wi-Fi-enabled low surface temperature heaters that can be controlled through a digital control panel on the heaters or the Consort Connect app. Features include a 7-day timer with 24 daily heating periods, a lock function, open window detection, custom automation, and energy consumption statistics. Additionally, LST heaters with Wi-Fi and occupancy sensor (MWIFI) have a self-learning control ability, using in-built occupancy sensors to detect and learn a user’s weekly presence in a room. It then creates a heating schedule and automatically warms the room according to the detected or predicted occupancy. When the space is unoccupied, the heater will conserve energy by switching to a setback temperature or frost protection mode.

Consort’s website also offers BIM objects for download.

To view more information about our WIFI and MWIFI heaters, click here.

3) HRXSL Handheld Controller Powered by Two ‘AA’ Batteries

Consort Claudgen’s HRXSL handheld controller is a versatile and user-friendly device specifically designed for use with their RX and SL heaters. This high-quality controller offers a choice of room temperature measurement, either directly on the controller or directly on the heaters, giving users the flexibility to choose their preferred method.

Pairing the HRXSL handheld controller with compatible heaters is quick and straightforward, enhancing user convenience. Powered by two ‘AA’ batteries, this controller ensures long-lasting performance. With its intuitive design and seamless integration with Consort Claudgen’s heaters, the HRXSL handheld controller is a must-have accessory for optimal heating control.

For more information about our HRXSL controller, click here.

At Consort, our dedicated Technical team look forward to providing you with invaluable technical support and advice regarding your heating requirements. The team will calculate heat loss and recommend the most suitable heaters for your project needs. To take advantage of our free advisory service with installation design, call us at 01646 692172 or email technical@consortepl.com. Our heating scheme form is also available on our website at www.consortepl.com. Please submit drawings, if possible, to further illustrate your project requirements