Skip to content
BPindex — The Largest Building Products Directory in the UK

lighting

Tesco Stratford-Upon-Avon Shines Brighter with Abacus LED Upgrade

Building Products Index Ltd LED Lighting, lighting, outdoor lighting Leave a Comment

View the Abacus lighting entry on BPindex

Visit the Abacus lighting website

Tesco’s Stratford-upon-Avon store, a key retail hub operating extended hours, has successfully transitioned from outdated metal halide lighting to a state-of-the-art LED system designed and implemented by Abacus Lighting. This upgrade enhances safety, energy efficiency, and sustainability across the site, delivering a safer environment for both shoppers and staff.

The Challenge

The original metal halide outdoor lighting posed challenges, including inconsistent illumination, high energy consumption, and costly maintenance. Tesco required a reliable, energy-efficient LED solution that aligned with its nationwide sustainability goals while also improving visibility in the car park, service yard, and canopy areas.

The Solution

Abacus Lighting delivered this project that included 13 new 10-metre root-mounted columns, primarily fitted with the advanced 250W Orion Pro symmetrical LED luminaires, complemented by one asymmetrical Orion Pro fitting for targeted lighting in the customer drop-off zone.

Additional pedestrian zones were illuminated with two new 8-metre columns equipped with Abacus’s EOS 34W LED lanterns, and existing columns were upgraded to maintain consistent lighting standards. Further improvements included adding eight more 250W Orion Pro units to ensure that the Tesco site was safely and securely lit.

Abacus – Benefits Delivered

  • Energy Savings: The LED upgrade significantly cuts energy consumption compared to metal halide lamps, reducing operational costs and environmental impact.
  • Improved Lighting Quality: Enhanced colour rendering and instant-on technology provide superior visibility without warm-up delays.
  • Lower Maintenance: Long lifespan of Orion Pro and EOS luminaires means fewer replacements and less disruption.
  • Optimised Installation: Market-leading spacing between Orion Pro columns reduces the number of lighting masts required, speeding installation and lowering costs.
  • Future Proofing: The system supports advanced controls (DALI 2 and D4i) and is built to withstand harsh conditions with IP66 and IK10 ratings.

Tesco Stratford now benefits from a modern, sustainable lighting system that boosts safety, supports environmental targets, and enhances the customer experience.

Abacu Lighting Key Products Used

Orion Pro LED Floodlight:

  • Available in 125W, 250W, and 500W options with 4000K color temperature (3000K optional)
  • Symmetrical and asymmetrical beam patterns for versatile applications
  • High lumen output (up to 72,000 lm) with excellent beam control to minimise light pollution
  • IP66 and IK10 rated, suitable for ambient temperatures up to 40°C (50°C optional)
  • Supports Zhaga interfaces and programmable lumen output for tailored lighting designs

EOS LED Lantern:

  • Three body sizes with wattages from 7W to 171W and multiple optic options
  • Ideal for pedestrian areas, car parks, retail parks, and railway stations
  • IP66 rated with robust, powder-coated finish for longevity in harsh environments
  • Tool-less, quick-access electrical compartments for easy maintenance

 

 

Additional Links:

Watch the Orion Pro LED product video: Abacus Lighting I Orion Pro LED Video

View more details on the Orion Pro LED Luminaires: Abacus Lighting Ltd | Orion Pro LED

See more details on Abacus’s EOS LED Lanterns: Abacus Lighting Ltd | EOS Lantern

Send Abacus Lighting an enquiry: Abacus Lighting Ltd | Contact us

ABACUS LIGHTING WINS KING’S AWARD FOR ENTERPRISE 2025

View the Abacus Lighting entry on BPindex

Visit the Abacus Lighting website

Celebrating Excellence in International Trade.

We are proud to announce that Abacus Lighting has been awarded the prestigious King’s Award for Enterprise in the category of International Trade 2025. This esteemed recognition reflects our unwavering commitment to delivering quality, world-class external LED lighting and mast solutions across global markets.

For over 65 years, Abacus Lighting has been at the forefront of the lighting industry, designing and manufacturing innovative, high-performance LED lighting systems from our headquarters and manufacturing plant in Nottingham, UK. From iconic sports venues like Kensington Oval and Lord’s cricket grounds to critical infrastructure across continents, our reach and reputation have continued to grow, culminating in this royal recognition.

Leaders In Lighting Solutions:

Our comprehensive product portfolio includes industry-leading luminaires and custom-built mast solutions engineered for exceptional performance.

Key products include:

Custom Manufactured High Masts and Columns:

We also bespoke manufacture fixed, raise/lower, and hydraulic and pneumatic telescopic high masts and columns, each tailor-made to our clients’ specifications. This unique capability allows Abacus Lighting to deliver complete, turnkey lighting solutions that meet the exacting needs of our clients, both nationally and internationally.

Lighting the Way in Key Sectors:

Our global success is built on delivering tailored solutions for a wide range of industry sectors:

Our UK clients trust us to deliver resilient, sustainable LED lighting that meets the needs of each unique project, and The King’s Award ensures that trust now extends worldwide.

A Royal Honour, A Team Achievement:

Winning the King’s Award for Enterprise is a testament to our international success and a celebration of the talented Abacus lighting team, our loyal clients, and global partners who make our mission possible. As we look to the future, Abacus Lighting remains dedicated to innovation, quality, and global service, shining brighter than ever on the world stage.

Let’s Talk Lighting
For lighting solution, installation, or maintenance enquiries, please contact us at:
📧 info@abacuslighting.com

💡 Explore our latest products and services:
🌐 www.abacuslighting.com
🔗 View our BPi page

The easy installs that pack extra punch

Building Products Index Ltd outdoor lighting, Time control Leave a Comment

PrintView the Timeguard entry on BPindex

Visit the Timeguard website

 

Installers rely on customer satisfaction to build up a solid base of repeat business and a steady stream of referrals. So, the quick installs that deliver extra benefits for their customers are always going to be useful weapons in their armoury.

Going above and beyond the norm, they tend to give stockists opportunities for bigger margins, too. So, display them loud and proud at the counter and make sure your staff are briefed to help sell them.

Here are a few ideas:

Swapping out ugly old outdoor lighting

Outdoor lighting can be pretty _ this will hardly show against a white soffit background_even the reflector plates are pure whitePeople soon become used to the convenience of automatic outdoor lighting but, after a few years in our wet climate, the units can begin to look a bit tired. Even plastic lights have metal parts liable to rust.

The wiring is already in place, making selling in the idea of a replacement easy, but Just fitting like for like is kicking the can down the road – the same problems of corrosion, stains on rendered walls and cloudy windows will soon recur. Instead, installers can make a real difference by choosing to rust resistant models for damp areas where old lights are rusty.  They can also add value by improving the looks of the property, choosing sleeker, windowless designs and perhaps all-white models to blend in better with rendered walls or for mounting on soffit boards.

 Adding new ways of controlling outdoor lighting

A neat idea - connect the RF controller for outdoor LEDs behind a standard switch No beed to conenct to the mainsIs the power switch for outdoor lighting in the right place for customers? Often you’ll find it next to the door, but why not offer less-mobile customers the option of remote RF control. With the Timeguard remote fob it’s also possible to ‘hide’ the RF remote inside any normal light switch, which won’t need to be connected to the mains or chased in – and of course it will never get lost! Leads from the remote are simply connected to the switch terminals and users can control their lights from a wall switch in any convenient location (The RF fobs described here are designed to work with the Timeguard LEDPro range of modular outdoor LEDS, with mix-and-match master and slave floodlights and a choice of PIR, photocell or RF control plug-in modules.

Switch off and save

Timing_fused sur protection_wifi control_all in one nand WiFi controlWherever there’s a fused spur, installers can save lives and money by making sure appliances like dangerous irons or expensive heaters won’t be left on accidentally. Simply replace the basic spur wire-for-wire with a device that also offers programmable time control.  With these fused spur time switches, installers can add hard-wired programmable time control to virtually any device or appliance in the home.

An alternative approach allows a boost timing – the device counts down and switches off automatically while still, of course, providing all-important fused spur protection.

Automatic wall switches are an easy retrofitSwitch smarter

Light switches can be put to work as well, with integral PIR and time control. Again, replacing basic switches with these smarter devices could hardly be easier, but the benefits to end users are immediate and obvious.

 

 

 

 

WiFi for all

Control heaters and immersions from your phoneWiFi is the name of the game – and it seems you’re nobody unless you can switch something at home on and off from your phone these days. For most people, it is the heating that they want to manage, usually turning it on ahead of schedule if they are heading home earlier or delaying it if they’ve decided to stay out.  There are many devices on the market to do this but perhaps the least expensive and simplest approach is adding WiFi functionality to the devices end users are going to need anyway: the fused spur timers,  hard-wired time switches and thermostats. Again, the market will get more crowded but, coming back to what we said at the very start of this article, an installer relies on satisfied customers and word-of-mouth recommendations. Whatever they fit has to be reliable. The hardware is one thing – and branded quality will rarely let you down – but don’t forget the importance of the software Apps that control WiFi devices. An App needs constant reviewing debugging and updating. Without that, customer satisfaction soon goes out the window, and returns pile up on your counter.

And look out for a new range of WiFi Accessories with the Timeguard difference coming this Summer.

Do encourage installers to take advantage of these nice little earners, but make sure you have their backs by supplying great products for them.

Are you ready to offer daylight harvesting – with or without DALI control?

Building Products Index Ltd LED Lighting, lighting, PIR Detection Leave a Comment

View the Timeguard entry on BPindexPrint

Visit the Timeguard website

 

 

PDFMCDALI_Side_On

You will undoubtedly have come across DALI in the course of your work, but maybe thought it was only for the big contractors on the big jobs?  That may have been the case in the past, but DALI controls and devices are finding their way into the mainstream. Now PIR leader Timeguard has released a line-up of DALI-compatible PIR switches.  With POR switch,  power supply and remote IR control all provided, you have everything you need to get started from a brand you know you can trust. After all, as installers you are used to providing homeowners and businesses with zoned lighting and scene setting – why not take it to the next level?

PDFMCDALI_PDFMDALI_Connections1And if you’re not ready, or the project doesn’t warrant DALI scene setting, then you can use these new PIRs as standalone detectors and still offer your customers daylight harvesting. That’s just another way of saying that lights will turn on and off in response to changes in the natural light, as the sun goes in and out, as well according to the time of day. You may also have heard this referred to as constant light control that, in the past, has been the preserve of PIR detectors designed – and priced – for the top end of the market.

 

Why bother?

Make best use of natural light with daylight harvestingThere are clearly cases and places where ordinary lighting is fine: if the application is simple and doesn’t require daylight harvesting (an important energy saving feature now specified in Building Regulations) , dimming, occupancy control or individual user control,  DALI isn’t the answer. But when you do need to design in or add any of these functions, then it is worth thinking about.

A DALI system just needs a DALI bus for communication between different points on the system such as the controller and a PIR.  So, an extra pair of cables between devices and control points of the system is needed : standard 2-core, minimum 1.5mm is sufficient. A DALI loop can contain up to 64 devices – typically LED drivers or PIRs – with multiple loops linked for larger projects.

What is it?

dali_logo_1The Digital Addressable Lighting Interface (DALI) is a standard that enables different devices on a system to talk to each other – they don’t even need to come from the same manufacturer. It’s an international standard, specifically created for lighting, for a two-way communication system that gives easy control and versatility. In a traditional system, control signals are one-way. In a DALI system, signal traffic is two-way, meaning LEDs can be commanded to perform requested actions, such as switch ON/OFF or DIM, but they can also be asked to provide information. The LED driver or switch can provide, for instance, information about intensity and energy consumption, or it can simply verify that it is working.

A DALI network consists of a controller, a power supply (which may be built into the controller) and one or more slave devices (eg ballasts, drivers, dimmers and PIR detectors) that have DALI interfaces. The controller can address devices individually or by multicast. Each device can be assigned to up to/any of 16 groups and can store up to 16 scenes that can be controlled by a single command

DALI sends messages around, and just like computer networks, the ballast with the right address picks the message up and follows the instruction: it might be ‘turn all the lights in the corridor on’, or it could be ‘switch to the theatre lighting scene in the conference room’.

Now that you know the basics, the decision may be a little more straightforward. Do you want to light several multi-function rooms that require different lighting options depending on time of day, usage etc. If so, think about DALI control with the new Timeguard range.

LED floodlights built for the British weather…

Building Products Index Ltd Flood lights, lighting Leave a Comment

Print

View the Timeguard entry on BPi

Visit the Timeguard website

LED_Coastal_Lighthouse lr
Rusty fittings, casings, screws and brackets on outdoor lights are no longer inevitable result of the British climate.

Timeguard’s new Coastal range maintains good looks for longer because all the metal parts are made of  high-grade stainless steel, from the brackets to the screws and even pcb components.

10W, 20W and 30W floodlights with integral PIR detectors are available, all with slave terminals for external loads. You can also connect floodlights in parallel so that any detector will switch them all on.

Another great new feature is the curved Timeguard panning bracket. No longer do you have to align floodlights flat to the wall, this clever curved bracket enables you to pan as well as tilt.

Stainless steel brackets will avoid corrosion in exposed areas LEDCSTSSBRWH_LEDCST20PIRWH_Bracket_In_Situ_1_colorconvert LR Also in white